[GreenKeys] [External] Model 33 parts

[Eric Moore]

Thank you for the suggestion, I will look into it.

I am purchasing the 60ma adapter board and pre-programmed PIC from Mike,
just need to put together a digikey cart :)

Once I have the board assembled I will likely post about the 14, I have a
keypunch I am working on but I hope to have it repaired soon.

-Eric



On Fri, Jan 20, 2023 at 5:48 PM Jeff G <jeffg at junknet.net> wrote:

> AH Finally saw this pic - I wonder if some older 1A2 style buttons would
> fit there! Personally, I'd get some good high res pics/scans to recreate
> it, and repaint it, and maybe get a t-shirt silk screening place to redo
> the art. I'm all about keeping things original original but thats really
> skimming that fine line of patina vs something else.
>
> 1A2 style buttons like this (not the smaller clear ones the normal 33 TWX
> would have):
>
> [image: image.png]
>
>
> Jeff
>
> On Fri, Jan 20, 2023 at 1:56 PM Eric Moore <mooreericnyc at gmail.com> wrote:
>
>> Yeah, a 3d printed clip would make a lot of sense. I will add it to the
>> pile o' projects and see if I find a roundtuit :).
>>
>> I have attached a photo of the panel. If I could find one more of those
>> buttons, I could try making a transparent sticker wirh the printing cleaned
>> up and removing the original damaged printing using acetone. Quite a
>> project, but if a replacement is not available from a parts machine it may
>> be my best option.
>>
>> Thanks all,
>>
>> -Eric
>>
>>
>>
>> On Fri, Jan 20, 2023, 12:26 PM Gillian Webb <thaeli at magfest.org> wrote:
>>
>>> I need to make a similar repair. Was considering using Sugru, or 3D
>>> printing a new version of the broken off bit and epoxying it in.
>>>
>>> Not sure when I will have time, but the 33 "Teletype" metal faceplate
>>> looks easy enough to make out of an aluminum sheet and the printing
>>> something that wouldn't be hard to clone with a laser cutter and some
>>> Cermark.
>>>
>>> That stamped radius edge on the modem blanking plate would be a pain
>>> though. I'd be inclined to mill it from bar stock and paint to spec if the
>>> original paint can still be sourced, but that gets a bit more pricey.
>>>
>>> - Gillian
>>>
>>>
>>> ______________________________________________________________
>> GreenKeys mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:GreenKeys at mailman.qth.net
>>
>> >>> Jordan Spencer Cunningham's GreenKeys Search Tool:
>> https://teletype.net/gksearch
>> >>> 2002-to-present greenkeys archive:
>> http://mailman.qth.net/pipermail/greenkeys/
>> >>> 1998-to-2001 greenkeys archive:
>> http://mailman.qth.net/archive/greenkeys/greenkeys.html
>> >>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
>> http://comcents.com/tty/greenkeyssearch.html
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jeffg at junknet.net
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230120/622f67e3/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 607966 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230120/622f67e3/attachment-0001.png>