[GreenKeys] Range Finder Setting/Distortion usage?

[W2HX]

Ok so the ASR good print goes from 55 to 115. So I'll set it for 85. It was at 80, probably doesn't make a difference.  Both printers are well within their good printing range. I wonder why, if they are both well within their good printing range, that they don't print exactly the same stuff off the air. And I don't mean the type pallet. I mean sometimes one will show an "E" and the other won't (maybe a space or blank). 

I think I'm good for now. Thanks everyone.

73 Eugene W2HX
Subscribe to my Youtube Channel: https://www.youtube.com/@w2hx/videos
 

-----Original Message-----
From: greenkeys-bounces at mailman.qth.net <greenkeys-bounces at mailman.qth.net> On Behalf Of W2HX
Sent: Sunday, February 5, 2023 6:16 PM
To: jim.w2jc at gmail.com
Cc: greenkeys at mailman.qth.net
Subject: Re: [GreenKeys] Range Finder Setting/Distortion usage?

> try pushing the knob IN hard and then turning ...  
That works!. All my other range finders don't seem to need any pressure before they can be rotated. Thank you (I sure feel dumb)


73 Eugene W2HX
Subscribe to my Youtube Channel: https://www.youtube.com/@w2hx/videos
 

-----Original Message-----
From: Jim Cooper <jim.w2jc at gmail.com>
Sent: Sunday, February 5, 2023 6:12 PM
To: W2HX <w2hx at w2hx.com>
Cc: greenkeys at mailman.qth.net
Subject: Re: [GreenKeys] Range Finder Setting/Distortion usage?

On 5 Feb 2023 at 23:05, W2HX wrote:

> I've started to test the ranges for
> each machine. I am using a fox
> generator that can also send RYs if
> I choose. The box is set to 0%
> distortion. I am using this in hopes
> to avoid any potential distortion that might be introduced by a TU. 
> The 28 KSR started having bad copy at 30, however it went all the way 
> through the MAX setting where the knob stops
> (120?) I continued to have good
> copy. Does this seem normal? 

There is probably some 'mechanical bias' in the machine ...  you could drive yourself batty trying to find the cause, or you could just subtract 30 
from 120 and divide by 2   ;) 
 
> On the 28 ASR, the knob is not
> turning at all. Am I supposed to
> loosen something? Maybe that nut in
> the center of the knob? 

try pushing the knob IN hard and then
turning ...  

w2jc


______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

>>> Jordan Spencer Cunningham's GreenKeys Search Tool: 
>>> https://teletype.net/gksearch 2002-to-present greenkeys archive: 
>>> http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: 
>>> http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: 
>>> http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to w2hx at w2hx.com