[GreenKeys] Castors for M33ASR Pedestals

[Bruce Gentry]

I put casters under two 33s using 1 inch square steel tubing inside the 
original stamped steel feet. A stack of washers between the the tubing 
and the original feet along with longer bolts made the tubing level with 
the bottoms of the original feet. I drilled and tapped the tubing to 
accept the thread of some casters I bought at Harbor Frieght. It works 
quite well and  because I could put the casters at the extreme ends of 
the tubing is surprisingly stable. I can send a PDF of a hand drawing of 
how it all went together to anyone who wants it.

     Bruce Gentry, KA2IVY

On 3/21/22 12:10, Steve Garrison wrote:
>
> Does anyone know the size needed?  They wouldn’t by any chance be the 
> same as the size used on M28s, would they?
>
> Steve G./N4TTY
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ka2ivy at verizon.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20220321/fb7489d9/attachment.html>