I put casters under two 33s using 1 inch square steel tubing inside the original stamped steel feet. A stack of washers between the the tubing and the original feet along with longer bolts made the tubing level with the bottoms of the original feet. I drilled and tapped the tubing to accept the thread of some casters I bought at Harbor Frieght. It works quite well and  because I could put the casters at the extreme ends of the tubing is surprisingly stable. I can send a PDF of a hand drawing of how it all went together to anyone who wants it.

    Bruce Gentry, KA2IVY

Does anyone know the size needed?  They wouldn’t by any chance be the same as the size used on M28s, would they?

 

Steve G./N4TTY

 

______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]