[GreenKeys] need low speed usb to RS232

[Jeff Stai]

I want to connect and use my ancient but beloved hardware modems via an
RS232 to USB connection.

I have dodged this question for years by installing PCIe to RS232 adapters
that were 16550 UART compatible. These adapters go slow enough to transfer
45/75 baud.

Modern FTDI USB/RS232 adapters won't go below 300 baud. And I'm running
into needing to connect to Win10/Win11 PCs that don't have available PCI
slots. (Progress...)

I know old Edgeport adapters might be the answer. If I can find one and the
available drivers behave on Win11 maybe that will work... but are there any
other alternatives I'm missing?

Thanks & 73 jeff wk6i


-- 
Jeff Stai ~ WK6I ~ wk6i.jeff at gmail.com
RTTY op at W7RN
Twisted Oak Winery ~ http://www.twistedoak.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20220309/37dbbf2e/attachment.html>