[GreenKeys] LPW-300 Paper Winder

[Joe Duszyński]

What's in a name???
When searching "eBay" look for "rewinder" not "winder" that is how I found
the one I use.
There are also tons of open end label rewinders that could be
modified/repurposed into winding wider width paper by mounting it to a
board
and adding a support on the opposite side for the wider roll.
If you are into 3D printing the same applies to the rewinders on
thingiverse you could modify those to suit as well.

On Sat, Jul 16, 2022 at 12:49 AM Pete G <craneplc at gmail.com> wrote:

> Hello all,
>
> I am looking to purchase a teletype paper winder LPW-300 or equivalent for
> a model 28. With my teletype running on ITTY-100, the output accumulates
> rather quickly.
> Any condition is acceptable.
>
> Thanks,
> Pete
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> >>> Jordan Spencer Cunningham's GreenKeys Search Tool:
> https://teletype.net/gksearch
> >>> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
> >>> 1998-to-2001 greenkeys archive:
> http://mailman.qth.net/archive/greenkeys/greenkeys.html
> >>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to joeduszynski1 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20220716/2f4d2d68/attachment.html>