[GreenKeys] Question on UGC-74A Teleprinters

[Daniel Jones]

I have a B model and the way I have to make it transmit is to manually switch the transmitter to transmit.  There is a wire that you can connect to utilize a switch on the UGC-74 on the same plug as the loop output.  

You also must jumper the plug correctly to make it half duplex from full duplex which then when you set the switches it operates.  I will get you this later this evening. 

I would be interested in your process to fix the A model.  Many people shy away from them because of the high speed roller. 

Daniel
K6YIC 

Sent from my iPhone

> On Apr 1, 2022, at 15:33, w1aea <w1aea at myfairpoint.net> wrote:
> 
> 
> 
> Does anyone on Greenkeys use a Mititary UGC-74A model? 
> There seems to be a diffetent startup print out between  the A and B units! My unit prints all ok from a 60ma loop and terminal  but I cannot get it to transmit?
> 
> Most say the A units are not usually usable because of the degraded Rubber feed rollers but I have found a good working repair for that if anyone has an A unit they would like to operate, 
> Thanks Jeff W1AEA
> 
> 
> 
> Sent from my Galaxy Tab® A
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to djones at k6yic.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20220401/6b4d95be/attachment.html>