I have a B model and the way I have to make it transmit is to manually switch the transmitter to transmit.  There is a wire that you can connect to utilize a switch on the UGC-74 on the same plug as the loop output.  

You also must jumper the plug correctly to make it half duplex from full duplex which then when you set the switches it operates.  I will get you this later this evening. 

I would be interested in your process to fix the A model.  Many people shy away from them because of the high speed roller. 

Daniel
K6YIC 

Sent from my iPhone

On Apr 1, 2022, at 15:33, w1aea <[email protected]> wrote:



Does anyone on Greenkeys use a Mititary UGC-74A model? 
There seems to be a diffetent startup print out between  the A and B units! My unit prints all ok from a 60ma loop and terminal  but I cannot get it to transmit?

Most say the A units are not usually usable because of the degraded Rubber feed rollers but I have found a good working repair for that if anyone has an A unit they would like to operate, 
Thanks Jeff W1AEA



Sent from my Galaxy Tab® A
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]