[GreenKeys] Type bar basket

[John, W9DDD]

Dumb question, is there any correlation with the springs that are rusted 
or broken?

---
----
The above comments or recommendations are SWAG. Use at your own risk.
John, W9DDD

On 8/28/2021 6:59 PM, Jim Cooper wrote:
> On 28 Aug 2021 at 22:27, steve bennett via GreenKeys
> wrote:
> 
>> This does not seem normal.A slight
>> push will pop it back out but I'm not
>> sure what would happen if I
>> attempted to run it under power
> 
> I don't think it is normal .... you should
> carefully push the bar up to the point
> where it sticks, wiggle it around a bit
> and see if you can determine what is making
> it stick ...
> 
> If it sticks while you are running the printer
> and printing, you will end up with a bunch of
> typebars all jammed together at the 'top' ...
> not a good situation, and might possible cause
> one or more to bend a bit out of line.
> 
> Jim  w2jc
> 
> 
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w9ddd at tapr.org
>