[GreenKeys] Video - Model 26 working / baudotrss question

[Radio AI2Q]

Oh, how I wish I still had my Model 26 and companion FRXD-3EL "climbing 
monkey" reperf!

Back in the mid-80s I donated them to the Science Museum of Long Island, 
and its director discarded them to the trash.

== AI2Q, Alex


On 9/29/2019 10:41 PM, epvgk at limpoc.com wrote:
> On Sun, Sep 29, 2019 at 09:54:09PM -0400, Zach Zarzycki wrote:
>> https://youtu.be/aHB8tWwZXbg
>>
>>
>>
>> There she goes! I spend most of today getting the power supply and board hooked up as I wanted. I copy/pasted a news story into the terminal and let it rip, working pretty well!
>>
>> I also had to learn how to build python which was a royal PIA as I've never been a fan of building from command line (using Windows to run everything right now, main pc is a hackintosh)
>>
>> Has anyone with the volpe board been able to use baudotrss? I set up my config file, change the volpe board to passthough, played around with baud rates, and character sets.. But baudotrss just pulls the RSS feed, says polling news (tried a few different rss feeds) then in verbose " debug: Messager ignoring input"
>>
>> It also printed TYP when it seemed to connect then won't push anything else to the teletype at all. If I close baudotrss, and open terminal, I have to actually reset the board in order to get any output from my terminal back to the teletype again!
> I've tried it and it seemed to work. Baudotrss expects to be talking to a "dumb" interface
> that just passes bits through and handles 45 baud character framing.
> To make the usb board do that you want "notranslate" and "no8bit" and it's probably best
> to disable break condition handling too with "noshowbreak".
> Also if you're going to disconnect the usb board at any point you'll want to "save" after
> making the changes,  since on powercycling or reset it would otherwise revert to whatever
> was saved before.
>
> eric
>
>>
>>
>>
>>
>>
>> ______________________________________________________________
>> GreenKeys mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:GreenKeys at mailman.qth.net
>>
>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to epvgk at limpoc.com
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ai2q at roadrunner.com


---
This email has been checked for viruses by AVG.
https://www.avg.com