[GreenKeys] Model 28 signal lines

[w9ddd at tapr.org]

And to make it more interesting, is it possibly a Wester Union version?

John, W9DDD


> On Oct 15, 2019, at 1:28 PM, B M <iamvirtual at gmail.com> wrote:
> 
> I took a look through the theory & operation manual for the Teletype Model 28 KSR (floor standing model), but I am still confused on where the signal lines in and out are located.  I do see the 2 terminal strips at the back of the cabinet with labels from 1-20 and 21-40.
> 
> I have a few questions
> 1. which terminals are for the signal lines in?
> 2. which terminals are for the signal lines out?
> 3. how do I determine that the unit is still set to use 60ma loop?
> 4. will 48v @ 60ma be sufficient to drive the model 28 KSR?
> 
> As you can see, I am not familiar with Teletypes. 
> 
> Any help would be greatly appreciated!
> 
> Thanks
> 
> --barrym
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w9ddd at tapr.org