[GreenKeys] 35 ASR TD Drivetrain

[Ken Wiebe]

OK thanks. It just seems like the TD end of the shaft, white gear that meshes with the TD gear, would have a support like the other end does.

And I wonder what the small black gear is for. Maybe answerback, if it was implemented?

Just thinking out loud.

Ken

On Tue, Jun 25, 2019, at 18:17, Clay Archer wrote:
> The large white gear is driven by the motor, the small black gear at the end of the shaft doesn’t mesh with anything. The shaft support bracket with ball bearing is between the large and small gear. I may have a parts list for the TD. If I can find it I’ll let you know. You will need part numbers if you order from someone like Paul (Mr. RTTY), a good source for many parts (see below).

> 

> http://www.johnwhitney.com/misc/paul-... <https://www.youtube.com/redirect?event=video_description&v=-LD872EWKaE&redir_token=kex-Vef3TXkmQKuY-tj6X_sLyoV8MTU2MTU5Nzg0MUAxNTYxNTExNDQx&q=http%3A%2F%2Fwww.johnwhitney.com%2Fmisc%2Fpaul-rtty.htm>

> RTTY Electronics

> PO Box 20101,

> El Sobrante, CA 94820-0101

> Paul Cembera (510) 222 3102

> mr_rtty at pacbell.net

> 

> Clay

> KG7LWX

> 

> 

> 

> *From:* greenkeys-bounces at mailman.qth.net [mailto:greenkeys-bounces at mailman.qth.net] *On Behalf Of *Ken Wiebe
> *Sent:* Tuesday, June 25, 2019 6:34 PM
> *To:* Thomas Tillson via GreenKeys
> *Subject:* Re: [GreenKeys] 35 ASR TD Drivetrain

> 

> Thanks. Snark appreciated too!

> 

> In the picture with the cover off, it looks like the TD end of the shaft just dangles out in space?

> 

> Ken

> 

> On Tue, Jun 25, 2019, at 17:06, Clay Archer wrote:

>> Photos attached. Looks like you are missing a few parts. Maybe someone on the list will give you the shaft! ;-)

>> Clay

>> KG7LWX

>> 

>> 

>> *From:* greenkeys-bounces at mailman.qth.net [mailto:greenkeys-bounces at mailman.qth.net] *On Behalf Of *Ken Wiebe
>> *Sent:* Sunday, June 23, 2019 6:56 PM
>> *To:* Thomas Tillson via GreenKeys
>> *Subject:* [GreenKeys] 35 ASR TD Drivetrain

>> 

>> Does anyone know how the TD is driven? A picture would be nice if anyone has one.

>> 

>> I appear to be missing a motor, pinion, gears, shaft, brackets, bearings, etc. All I have is the TD and the base-related parts.

>> 

>> On the base there is a cradle where the motor apparently goes. But the axis of the motor shaft does not line up with the TD gear, so there must be some transfer shaft and more gears. Either that, or the motor cradle is in the wrong place (?).

>> 

>> I did find some exploded views but there are several variants and I'm not sure which one (if any) applies in my case.

>> 

>> I attd a photo of what I described above.

>> 

>> The TD is LXD812, base is LCXB806.

>> 

>> Thanks,

>> 

>> Ken

>> 

>> 

>> 

>> *Attachments:*

>>  * 20190201_232549.jpg
>>  * 20190625_175702.jpg
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20190625/ad0431e6/attachment.html>