[GreenKeys] 35 ASR TD Drivetrain

[Clay Archer]

The large white gear is driven by the motor, the small black gear at the end
of the shaft doesn't mesh with anything.   The shaft support bracket with
ball bearing is between the large and small gear.   I may have a parts list
for the TD.    If I can find it I'll let you know.   You will need part
numbers if you order from someone like Paul (Mr. RTTY), a good source for
many parts (see below).

 

http://www.johnwhitney.com/misc/paul-...
<https://www.youtube.com/redirect?event=video_description&v=-LD872EWKaE&redi
r_token=kex-Vef3TXkmQKuY-tj6X_sLyoV8MTU2MTU5Nzg0MUAxNTYxNTExNDQx&q=http%3A%2
F%2Fwww.johnwhitney.com%2Fmisc%2Fpaul-rtty.htm>  

RTTY Electronics

PO Box 20101,

El Sobrante, CA 94820-0101

Paul Cembera (510) 222 3102

mr_rtty at pacbell.net

 

Clay

KG7LWX

 

 

 

From: greenkeys-bounces at mailman.qth.net
[mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of Ken Wiebe
Sent: Tuesday, June 25, 2019 6:34 PM
To: Thomas Tillson via GreenKeys
Subject: Re: [GreenKeys] 35 ASR TD Drivetrain

 

Thanks.  Snark appreciated too!

 

In the picture with the cover off, it looks like the TD end of the shaft
just dangles out in space?

 

Ken

 

On Tue, Jun 25, 2019, at 17:06, Clay Archer wrote:

Photos attached.    Looks like you are missing a few parts.   Maybe someone
on the list will give you the shaft! ;-)

Clay

KG7LWX

 

 

From: greenkeys-bounces at mailman.qth.net
[mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of Ken Wiebe
Sent: Sunday, June 23, 2019 6:56 PM
To: Thomas Tillson via GreenKeys
Subject: [GreenKeys] 35 ASR TD Drivetrain

 

Does anyone know how the TD is driven?  A picture would be nice if anyone
has one.

 

I appear to be missing a motor, pinion, gears, shaft, brackets, bearings,
etc.  All I have is the TD and the base-related parts.

 

On the base there is a cradle where the motor apparently goes.  But the axis
of the motor shaft does not line up with the TD gear, so there must be some
transfer shaft and more gears.  Either that, or the motor cradle is in the
wrong place (?).

 

I did find some exploded views but there are several variants and I'm not
sure which one (if any) applies in my case.

 

I attd a photo of what I described above.

 

The TD is LXD812, base is LCXB806.

 

Thanks,

 

Ken

 

 

 

Attachments:

*	20190201_232549.jpg
*	20190625_175702.jpg

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20190625/5163a2f2/attachment.html>