[GreenKeys] Different bear question

[E.]

When I tried getting my motor fan off - the one time I thought the bearings were going bad (but luckily weren’t), I couldn’t ;o … a scary bridge indeed ><; ~


> On Aug 23, 2019, at 5:00 pm, John, W9DDD <w9ddd at tapr.org> wrote:
> 
> Actually this is more about getting to the bearings.
> 
> I have 1/12 HP motor that is going to need bearings by the sound of things.  The question is what about the fan.  I'm guessing it's press fit and you have to pull it off with a bearing puller.
> 
> I did see a screw, but even after I removed it, I still think it's going to take a bearing puller.  If the fit is that tight, it's going to be fun to put back on and have the screw hole line up with the one in the shaft.
> 
> Anyone crossed this bridge before?
> 
> When I pull on the fan, the whole shaft pulls with it about an 1/8". The other motor doesn't do that.  Doesn't sound good.
> 
> -- 
> John, W9DDD
> Ich habe dreimal abgeschnitten uns jetzt zu kurtz. (I cut it off 3 times and it's still too short.)
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to hanyou at xsmail.com