[GreenKeys] Anyone need 3 amp Edison fuses (for 15s, 19, etc.)?

[E.]

Forget what I just asked - I totally got things turned around - too many things going on around the house with the wife gone out of town and the kids and all :( ~


> On Aug 16, 2019, at 3:21 pm, E. <hanyou at xsmail.com> wrote:
> 
> 
> Hey-ho, I’ve had interest in the 3 amp fuses.  In conversations, one Greenkeyer pointed out that specs say that the fuses (Fusetrons) should be 3.2 amps (attached image):
> 
> <Embedded1565968941850.png>
> 
> Then again, the schematic I’m reading for 19’s point to 3 amps for governed motors (attached image):
> 
> <Screen Shot 2019-08-16 at 2.27.37 pm.jpg>
> 
> The two 19’s that I have are synchronous motors (require a bit more amps when starting up), yet they have the old 3 amp Fusetron (Type T) in them and work fine.  The ones that I’m looking at with the local supplier are also T-3 fuses.
> 
> Anywho, what’s the correct fuse for the 15s and 19s - 3 or 3.2 amps ;p ???  Looking for a general consensus before going any further on purchasing :) .
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to hanyou at xsmail.com