[GreenKeys] Anyone need 3 amp Edison fuses (for 15s, 19, etc.)?

[E.]

Hey-ho, I’ve had interest in the 3 amp fuses.  In conversations, one Greenkeyer pointed out that specs say that the fuses (Fusetrons) should be 3.2 amps (attached image):



Then again, the schematic I’m reading for 19’s point to 3 amps for governed motors (attached image):



The two 19’s that I have are synchronous motors (require a bit more amps when starting up), yet they have the old 3 amp Fusetron (Type T) in them and work fine.  The ones that I’m looking at with the local supplier are also T-3 fuses.

Anywho, what’s the correct fuse for the 15s and 19s - 3 or 3.2 amps ;p ???  Looking for a general consensus before going any further on purchasing :) .
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20190816/35e4eb62/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Embedded1565968941850.png
Type: image/png
Size: 44729 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20190816/35e4eb62/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screen Shot 2019-08-16 at 2.27.37 pm.jpg
Type: image/jpeg
Size: 10641 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20190816/35e4eb62/attachment.jpg>