[GreenKeys] Serial Settings

[Rob Jarratt]

I don't know the details of my keyboard (how to tell it is parity or not),
but I used 7E2 successfully to connect from a simulated DECSYSTEM-20 via a
DECserver 90M in reverse telnet configuration and a Westermo MA-21. The port
on the DECserver 90M is set to 7E2. Not sure if that helps.

 

Regards

 

Rob

 

From: greenkeys-bounces at mailman.qth.net <greenkeys-bounces at mailman.qth.net>
On Behalf Of Ken Wiebe
Sent: 08 August 2019 18:13
To: Thomas Tillson via GreenKeys <greenkeys at mailman.qth.net>
Subject: [GreenKeys] Serial Settings

 

Hi Greenkeys,

 

I have a 33 set up to communicate over RS-232 serial.  I've read online some
conflicting info regarding serial settings.

 

Does it boil down to parity vs. non-parity keyboard?

 

So parity keyboard would be 7E2 and non-parity 8N2?  (my keyboard is
non-parity)

 

I'm having some issues with CR/LF too, but I'm not sure what to expect
regarding the interaction between the 33 and the terminal program I'm using.

 

Any tips, anecdotes from Greenkeyers who have explored this appreciated.

 

Ken

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20190808/98163a19/attachment.html>