[GreenKeys] m28 reperf punch block

[Til128 at aol.com]

To make things go smoothly you will need a spring puller. (75765) they are  
also available at tool warehouses.
 
TT
 
PS - FWIW - From what I was led to believe, some of the tedious assembly  
was performed by little old ladies with blue hair from Skokie.  ;-)
 
TT
 
 
 
In a message dated 3/22/2017 7:26:48 A.M. Eastern Daylight Time,  
stritzel at svs.com writes:

THANKS  again Nick (K4NYW) for the confirmation about the notches/indents 
facing  to the right.  Also, THANKS for the info where the springs are  
attached.  I see where they go (bottom of 305638) and now the trick  of 
assembling the springs, punch block, etc.  Any hints will be  appreciated!
Makes me wonder how all of this stuff was assembled in the  factory!
______________________________________________________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20170322/d3da0080/attachment.html>