[GreenKeys] Friden Translator 90 volt coil

[Michael Zahorik]

I was attempting to clean up a sticky relay armature on a translator coil of my Friden SPD-V Flexowriter. While doing this either I pulled a coil lead out of a coil or it was ready to come out on it's own. Anyway this coil is now open and the translator doesn't work correctly with out it. 

First I carefully removed the coil and then removed the outer covering of the coil. I found the broken end of the coil. Problem is it is very fine wire. What I need to so is clean the enamel off the wire to solder a lead back on. How should I do this without damaging the wire.
Second if this can not (or I can not) be done, the part number on the coil is F1055816R. Does anyone have a coil like this?
Here is a picture of what I have to work with. The broken end is sticking out of approx the middle of the coil. Any suggestions? Thanks
 Mike Zahorik (414) 254-6768
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20170305/9af173fc/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_1264.jpg
Type: image/jpeg
Size: 209964 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20170305/9af173fc/attachment.jpg>