[GreenKeys] Test Set 100A

[Richard Knoppow]

    I am not at all familiar with this thing but if the transformer is 
of the open case type check the connections where the leads come out. 
Sometimes the connections from the winding to the leads can be resoldered.

On 6/3/2017 4:09 PM, Kevin DeWitt wrote:
> Greetings,
> 
> After replacing the power cord on my Distortion Test Set 100A (including 
> the fiddly bakelite rocker switch assy) it was determined that the 
> Holtzer-Cabot RBC 2510 has what I think is an open in the primary winding.
> 
> Black to Yellow = open
> Black to Red = open
> Red to Yellow = 600 ohms
> 
> Condenser = 1.74 mF
> 
> The motor is AC synchronous and 1800 RPM @ 60hz. Does anyone have any 
> insight or maybe even a replacement motor? It's too pretty to just throw 
> away.
> 
> Kevin/ww2tty
> 
> 
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 

-- 
Richard Knoppow
1oldlens1 at ix.netcom.com
WB6KBL