[GreenKeys] Fw: Model 15 restoration challenges

[JC White]

Have you confirmed that the selector magnet armatures are moving freely when you feed the loop from your TU?  Have you adjusted the range finder at all?  Are the 5 vanes changing position (up - down) as characters come in?  The spacing after each printed character is particularly worry some to me...
And no, CR and LF are no different than any other character; ie, they are not an automatic function (unless the auto CR kit has been installed), so if anything is OOA in the selector mechanism then don't expect any greater likelihood of CR and LF working than any other character printing...

JohnWB6BLV

     
On 2/2/2017 8:43 PM, Nick wrote:
> 3. Couldn’t figure out what was going on and wired the M15 up like
> an electric typewriter (keyboard, selector magnets and 9V battery in
> series) – just temporary. Started typing and receiving the same
> garbage.



______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jcw1231 at pacbell.net

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20170203/ed2773e3/attachment.html>