[GreenKeys] M28LPR print hammers...

[Nick England]

Yes I have Ken's NOS original.
I also have the dimensional data.
I'll connect with Pete when I get back home next week.
Nick


On Thu, Aug 3, 2017 at 1:42 PM Kenneth Gartland <trnsrme at gmail.com> wrote:

> Hi all!
>
> I do remember sending someone on the list, maybe
> Nick, a "NOS" sample I had, a one of a kind original!
>
> The idea was to have a 3D printer try to make one
> to see if it is feasable...
>
> A little note of caution, an original print hammer
> that has been installed for a long time,
> is very diffcult to remove without "Splitting"
> where it mounts over the print hammer arm...
>
> So, one wud have to be really careful attempting
> to remove it!
>
> The material I think is "Delrin" or a similar, which
> sort of "Petrifies" with age...
>
> Those of you Model 32/33 users with later and
> latest LF upstop blocks, are well aware of this
> splitting problem...
>
> I believe it is the same material...
>
> I hope there is a solution for all the Model 28
> and 35 LPR owners out there...
>
> 73'
>
> Ken
> VE3-HMQ
> i-Telex 61663
>
>
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 <http://mailman.qth.net/pipermail/greenkeys/1998-to-2001>
> greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-- 
Nick England K4NYW
www.navy-radio.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20170803/c26a4d46/attachment.html>