[GreenKeys] M28LPR print hammers...

[Kenneth Gartland]

Hi all!

I do remember sending someone on the list, maybe
Nick, a "NOS" sample I had, a one of a kind original!

The idea was to have a 3D printer try to make one
to see if it is feasable...

A little note of caution, an original print hammer
that has been installed for a long time,
is very diffcult to remove without "Splitting"
where it mounts over the print hammer arm...

So, one wud have to be really careful attempting
to remove it!

The material I think is "Delrin" or a similar, which
sort of "Petrifies" with age...

Those of you Model 32/33 users with later and
latest LF upstop blocks, are well aware of this
splitting problem...

I believe it is the same material...

I hope there is a solution for all the Model 28
and 35 LPR owners out there...

73'

Ken
VE3-HMQ
i-Telex 61663
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20170803/dc1a44aa/attachment.html>