[GreenKeys] What are these shims for ?

[Pete Lancashire]

Good catch  https://goo.gl/photos/5BM9wU2YYqzzy5d1A

Left front spacing wheel https://goo.gl/photos/JaNMTGNGDBPfgF8BA

Screws missing ?

Added a few more shot the the main album, at the end.



On Sun, Apr 16, 2017 at 10:41 AM, Jack <wa2hwj at att.net> wrote:

> The shims are used to adjust the spacing gear’s mesh to the mainshaft gear.
>
> Those are unused “spares”.
>
>
>
> I also notice there’s a twisted/bent tab on the inside of the right front
> spacing
>
> wheel. You might want to watch that when you get the machine running.
>
> It might be the right-margin stop or the stop for auto CR/LF. Hard to see.
>
>
>
> Jack K2TTY
>
>
>
>
>
>
>
>
>
>
>
> *From:* GreenKeys [mailto:greenkeys-bounces at mailman.qth.net] *On Behalf
> Of *Pete Lancashire
> *Sent:* Sunday, April 16, 2017 1:34 PM
> *To:* greenkeys <GreenKeys at mailman.qth.net>
> *Subject:* [GreenKeys] What are these shims for ?
>
>
>
> On the printer from the 28RO there are these bent up shims
>
> https://goo.gl/photos/sj5NLfDjQ5bfTJZh6
>
> what are they for ?
>
> -pete
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive: http://mailman.qth.net/
> pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/
> archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20170416/1fa2c16d/attachment.html>