[GreenKeys] AC Sync Wire Lead

[COURYHOUSE at aol.com]

did  the DC motor  die  or  were you looking   for lower  RFI without the 
governor? 
 
 
In a message dated 11/26/2016 7:15:44 P.M. US Mountain Standard Time,  
kevin.dewitt at gmail.com writes:

Greetings  


My latest WU 2B with the 3A Gumming Table is getting a new-to-it AC  
Synchronous Motor. Upon attempting the install it has been determined that the  
cloth covered wire insulation on the leads is much crunchier than I like. The  
leads appear to be about 16 gauge. The leads on the other 2B I have are 
closer  to 18 gauge. I checked it with a meter and it wasn't shorted but I do 
not  trust it.


So, it seems to me like the next step would be to (gently) pull the fan  
and attack it from that end but wasn't there some discussion about difficulty  
in (pulling the fan) several years ago? I tried to search the archives but  
found nothing. So, rewire or no and if so can i get away with 18 gauge?


Motorless in Ohio


Kevin/ww2tty



______________________________________________________________
GreenKeys  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/greenkeys
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive:  
http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive:  
http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's  2001-to-2009 GreenKeys Search Tool:  
http://comcents.com/tty/greenkeyssearch.html

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html
Message delivered to  couryhouse at aol.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20161127/f0bee698/attachment.html>