[GreenKeys] Teletype Model 15 power Q's...

[Eric & Jia Bigham]

Roger, will do :) !… see what I get ^_^ .  Will keep you updates and thanks again ^^ !!!~

;D


> On Nov 10, 2016, at 9:58 am, Jim Haynes <jhhaynes at earthlink.net> wrote:
> 
> Looks like you have a pretty good schematic.  There are lots of individual
> variations.  It's pretty common to have the original 4-prong power cord
> removed, and you can't get the original plugs and sockets anymore.  At
> least not as new parts.   You could just run a separate cord carrying
> power to your DC power supply from the appropriate terminals on the base.
> 
> Yes, if you run DC in where it shows and pull the line-test key then it
> should print on the printer from the keyboard.  But you may want to
> ohmmeter everything first to be sure you are getting about 2K resistance
> between the DC terminals when the knob is pulled out and open circuit
> when it is pushed in.
> 
>