[GreenKeys] Rust Removers: Experience?

[COURYHOUSE at aol.com]

RUST AWAY - RUST AWAY STAIN REMOVER 16 OZ.
> This stuff is a  gel - you apply then wipe or wash off later.


Eric  I had  some  like this different  name (   39years ago can not 
remember)
but had a rusty old  xray machine  stand I mage into a   camera monopole in 
 my  photo studio 
( what I did  before the computer biz)

it  worked well...  that active ingredient was   phosphoric acid
 
Ed Sharpe
 
 
 
In a message dated 11/9/2016 11:47:20 A.M. US Mountain Standard Time,  
epvgk at limpoc.com writes:

Evapo-rust works great just by immersion overnight. It will remove  
protective 
treatments like parkerizing, bluing, etc which can result in  treated parts 
becoming more prone to rusting again afterward. 

As  far as removing rust, they all work but the gel ones (phosphoric acid I 
 think)
are more work and probably no better no better in performance.  

eric



On Wed, Nov 09, 2016 at 01:32:47PM -0500, Roy  Morgan wrote:
> Greenkeyers,
> 
> Some time ago, there were  posts on the list about the use of "Rust Away" 
or
> some similarly-named  product, with very good results reported and advice 
on
> use  offered.
> 
> I recently got a Unimat LS-1000 miniature lathe and  need to de-rust most 
of
> the parts. My memory may be weak, but I looked  in auto parts stores,
> hardware stores, and on the Web, for "Rust-  Away".  I found only 
Evapo-Rust
> in one store, which I did  buy.
> 
> I did find online this:
> RUST AWAY - RUST AWAY  STAIN REMOVER 16 OZ.
> This stuff is a gel - you apply then wipe or wash  off later.
> This web-site tells about some available products,  including Evapo-Rust,
> but not the one I remember:
>  https://www.theruststore.com/Rust-Remover-Comparison-Chart-W22.aspx
>  
> What experience have list members had?
> Products? Results?  Advice?
> 
> (I also need sources for drive belts for this  wonderful small lathe.)
> 
> Thanks much,
> 
> --  
> Regards,
> Roy
> 
> Roy Morgan
> k1lky since  1958

>  ______________________________________________________________
>  GreenKeys mailing list
> Home:  http://mailman.qth.net/mailman/listinfo/greenkeys
> Help:  http://mailman.qth.net/mmfaq.htm
> Post:  mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys  archive: 
http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001  greenkeys archive:  
http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy  Guttery's 2001-to-2009 GreenKeys Search Tool:  
http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted  by: http://www.qsl.net
> Please help support this email list:  http://www.qsl.net/donate.html
> Message delivered to  epvgk at limpoc.com
______________________________________________________________
GreenKeys  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/greenkeys
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive:  
http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive:  
http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's  2001-to-2009 GreenKeys Search Tool:  
http://comcents.com/tty/greenkeyssearch.html

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html
Message delivered to  couryhouse at aol.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20161109/9bf19e5e/attachment.html>