[GreenKeys] Got a clean HW-101 manual nice! but forgot I needed a SB 101 ...

[COURYHOUSE at aol.com]

OK  Got  it!    Many  thinks  for the  hints!
 
I  have the  rubber  belts  for the  tuning stuff  on the rig to replace
we will see if  we can make it  talk!
 
Ed#
 
 
In a message dated 1/24/2016 7:45:20 P.M. US Mountain Standard Time,  
tony.podrasky at gmail.com writes:

I ran it  on AFSK - because if you shift the VFO, since it's a
transceiver, it might  do weird things during receive if the keyboard,
printer are in the same  loop.

Oh - on the AFSK tones: keep the drive low enough that you don't  get
distortion.

UE,
K2EAA - TONY
NNNN
ZCZC


On  01/24/2016 06:42 PM, COURYHOUSE at aol.com wrote:
> WoW  thanks  !!   Tony were you running fsk or afsk?  I  guess I   could
> do either!? Ed#
> In a message dated 1/24/2016 7:28:45  P.M. US Mountain Standard Time,
> tony.podrasky at gmail.com  writes:
>
>
>
>     On 01/24/2016 05:31  PM, Ed Sharpe Archivist for SMECC via GreenKeys
>      wrote:
>      > Got a clean HW-101 manual nice!   but forgot I needed a SB 101 
manual!
>      > How  close are the  2 transceivers? ?
>
>      More-or-less the same. I do recommend getting the SB-101  manual.
>
>      > Want to HF  rtty   this ! any dos or hints on SB-101 rtty  work
>      is  good!
>
>     Yes - I ran the SB-101 and  SB-102 on RTTY for years.
>
>     o Muffin fan over  the final cage - pulling the air out.
>
>     o  Muffin fan on top of the power supply.
>
>     o  Run the transmit power around 50 watts.
>
>     o  Now, this one I got from Irv Hoff himself - the problem is that,  
after
>         45 years, I'm not quite sure  which one went where - but if you 
look
>       at the block diagram and do the calculations, you should be able  to
>         figure out which one to switch  where. Here goes...
>
>         If you  put the LSB crystal in the USB crystal's position, it will
>   adjust the passband PERFECTLY for the 2125 &  2295 tones - and that
>         is in both  directions - receive and transmit!
>
>       As I recall, I bought a 2nd LSB crystal, unsoldered the USB  
crystal,
>         drilled a hole close by for  a sub-mini SPDT switch, installed the
>     switch,  soldered one side of both crystals together and to one side
>   of the socket, and then soldered the other end of  the crystals to
>         the SPDT switch.  Worked GREAT! I was able to still do SSB USB & 
LSB,
>     and RTTY with the standard tones.
>
>   Make you check payable to  K2EAA...
>
>     UE,
>      K2EAA - TONY
>     NNNN
>      ZCZC
>
>
>      > Thanks in  advance!   and if  someone  has a SB-101 manual  and
>     needs a HW
>      >  101  manual  let  me know!
>      > Ed  Sharpe Archivist  for SMECC www.smecc.org  
<http://www.smecc.org/>
>      >
>   >
>
>     --
>   I have yet to see any problem, however
>      complicated, which when looked at in the right
>     way,  did not become still more complicated.
>         -Poul Anderson
>

-- 
Why does your dog keep staring at me and  growling?
Because he thinks you're stealing food from  him.
Why would he think that?
Prolly 'cuz  that's his bowl you're eating out of...
- Tony J.  Podrasky

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20160124/16fde5f9/attachment.html>