[GreenKeys] Rubber Renue

[teletypeparts at comcast.net]

Rob, 
  
With a sprocket feed 33, you really dont need to work on the platen unless you are concerned about cracking due to age.  
  
I have never used the product you mention.  I have used Techspray Rubber rejuvenator/platen cleaner.  I have had it a long time, but here is a link that might be good.  www.techspray.com 
  
I am sure other members have better stuff.  
  
73, 
  
Wayne 
KB1FDW 

----- Original Message -----

From: "Robert Jarratt" <robert.jarratt at ntlworld.com> 
To: greenkeys at mailman.qth.net 
Sent: Friday, June 5, 2015 1:56:40 PM 
Subject: [GreenKeys] Rubber Renue 



Someone on the classiccmp list has suggested using this for renewing the platen on a Model 33. Has anyone here done this? 

  

Mine is sprocket feed, would it make much difference? The platen does feel quite hard, but I don’t have anything to compare it with to say if it really needs renewing. 

  

Regards 

  

Rob 

______________________________________________________________ 
GreenKeys mailing list 
Home: http://mailman.qth.net/mailman/listinfo/greenkeys 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:GreenKeys at mailman.qth.net 

2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/ 
1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html 
Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20150605/6cb7cbfb/attachment.html>