[GreenKeys] M15 paper path

[Eric]

Ok so I realized I've never quite figured out if I have this right.

It seems to me you'd want to be able to tear the paper off the top of a 
M15 without screwing everything up but I can't do that on mine, and I 
don't know if it's because if I'm feeding the paper wrong or if 
something is assembled wrong or what.

There's a triangular metal bar on the underside of the lid and the glass 
on the upper side of the lid, where the paper comes out. It looks like 
the paper should go between the two, but then there's no edge to cut the 
paper against. The triangular metal bar looks like it could provide a 
tearing edge, but if the paper goes under it it impedes it from feeding 
freely.

Anyone want to educate me? :)

-------------- next part --------------
A non-text attachment was scrubbed...
Name: paper1.jpg
Type: image/jpeg
Size: 36227 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20150103/c840781d/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: paper2.jpg
Type: image/jpeg
Size: 56244 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20150103/c840781d/attachment-0003.jpg>