[GreenKeys] rubber grommet

[Rodger Casey]

Wayne et al.,
I have a sprocket-feed M28 and am looking for parts to convert it from its current eight inch paper size to nine inches.  Does anyone here have these?
Thanks for info! 
Rodger WA9BQX/4



> On Feb 25, 2015, at 5:21 PM, teletypeparts at comcast.net wrote:
> 
> Dave,
>  
> Small miracle!  The sprocket feed printer which I planned to use for parts has 2 good rubber grommets (181014).  I will send you one tomorrow along with the plastic bushing just for you to check out.  We dont need the bushing.  They survive well and I have a few used ones that are good.  Just the rubber grommet.  I wouldnt install the bushing in the grommet as you may destroy the grommet.
>  
> We have been using the wrong name for the part we need.  Its grommet, not bushing.  Or at least I have.  LOL.
>  
> Wayne
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20150225/72272b81/attachment.html>