[GreenKeys] HAL ST-6000

[Teletypeparts via GreenKeys]

Dale,

Its almost too simple a question to ask, but did you reverse the leads?

Wayne
KB1FDW




-----Original Message-----
From: W2HX <w2hx at w2hx.com>
To: dhagert <dhagert at comcast.net>; greenkeys <greenkeys at mailman.qth.net>
Sent: Fri, Sep 12, 2014 2:17 pm
Subject: Re: [GreenKeys] HAL ST-6000



I don’t know about the ST-6000, but the later ST-6’s have a molex connector on the back for the loop. There are actually 2 loop connections on that molex. If you run only one machine, you need to jumper part of that molex connector. Again, I don’t know about the 6000. Just a suggestion
eugene
 

From: GreenKeys [mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of dhagert
Sent: Wednesday, September 10, 2014 4:22 PM
To: greenkeys at mailman.qth.net
Subject: [GreenKeys] HAL ST-6000

 
I purchased an ST-6000 and cannot get the loop to work with my model 28. I hooked it up to the loop connector, but the machine runs open. I checked and I do have the correct loop voltage. If I ground the return line from the 28 the selector magnets close. Am I missing a jumper or something on the 6 pin connector?
 
My ST-6 works just fine with the 28.
 
Thanks for your help.
 
Dale W0IR


______________________________________________________________
reenKeys mailing list
ome: http://mailman.qth.net/mailman/listinfo/greenkeys
elp: http://mailman.qth.net/mmfaq.htm
ost: mailto:GreenKeys at mailman.qth.net
2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
andy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
This list hosted by: http://www.qsl.net
lease help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20140912/c0a04144/attachment.html>