[GreenKeys] HAL ST-6000

[W2HX]

I don't know about the ST-6000, but the later ST-6's have a molex connector on the back for the loop. There are actually 2 loop connections on that molex. If you run only one machine, you need to jumper part of that molex connector. Again, I don't know about the 6000. Just a suggestion
eugene

From: GreenKeys [mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of dhagert
Sent: Wednesday, September 10, 2014 4:22 PM
To: greenkeys at mailman.qth.net
Subject: [GreenKeys] HAL ST-6000

I purchased an ST-6000 and cannot get the loop to work with my model 28. I hooked it up to the loop connector, but the machine runs open. I checked and I do have the correct loop voltage. If I ground the return line from the 28 the selector magnets close. Am I missing a jumper or something on the 6 pin connector?

My ST-6 works just fine with the 28.

Thanks for your help.

Dale W0IR
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20140912/4eb8330a/attachment.html>