[GreenKeys] Need ASR33 repair help, in Ann Arbor MI

[gil]

Yeah, you need to reply all.  You can delete the op so they don't get a dup but most of us forget and just ingore a dup here and there.  I should look into that reply thing.  Maybe it can be changed.  It's just always been that way.

Gil


Sent from my portable teletype machine.

-------- Original message --------
From: "drlegendre ." <drlegendre at gmail.com> 
Date: 11/27/2014  10:28 PM  (GMT-07:00) 
To: Teletypeparts <teletypeparts at aol.com>,GreenKeys at mailman.qth.net 
Subject: Re: [GreenKeys] Need ASR33 repair help, in Ann Arbor MI 
 
Wayne,

For those of us not in-the-know, could you briefly explain the function of the 'distributor' in these machines? Is this a mechanical rotary contactor, the likes of an automotive distributor - less the spark gap, of course? Does it use carbon brushes / wipers and so forth?

@All

How the +HECK+ do you reply in-thread to a greenkeys post? I'm used to communicating with other lists via gmail, where if I hit the 'Reply' field, it sends my reply to the list, and properly threads it. With greenkeys. my replies always go directly, and personally to the last poster - rather than the list et al. 

If you're seeing this post, it's because I tacked a greenkeys reply to the To: field in the mail, which is actually pointed to Wayne / Teletypeparts. Are you all seeing this, properly threaded? If not, how do I handle this properly via gmail?

I can only imagine the duplicate threads and other havoc my alleged contributions might be creating. Thank you for your deference on this occasion of my newbishness. ;-)

-ML

On Thu, Nov 27, 2014 at 10:04 AM, Teletypeparts via GreenKeys <greenkeys at mailman.qth.net> wrote:
Keith,
 
I dont live near your location but I can give you a few tips. 
 
Dont type too much without inspecting the rubber hammer that hits the typewheel.  If the rubber hammer falls of or disintegrates you will ruin the typewheel quickly. 
 
Most 33 troubles can be found by visual inspection.  No adjustments unless you have exhausted the visual stuff.  Look for things out of place like contacts in the keyboard, tape reader and answerback. 
 
There should be nothing in the machine that needs force to fix or correct.  Go slow. 
 
33's that have been sitting a long time usually have congealed grease on the codebars and other areas that need freeing up.  The codebars ride on slotted round bars on each end and in the middle.  I use "Breakaway" in those areas very carefully sprayed on.  Very Carefully! 
 
Dont spray any solvents into the keyboard contacts or other plastic contact areas.  Use a pipe cleaner with some contact cleaner sprayed on the pipe cleaner and clean carefully.  You may not need to do this.  Remember that the kybd, TR and AB contacts are all in parallel feeding the distributor.  Thats why its good to be able to test the printer from another source before assuming that you have printer problems when the problem might be in one of the three subassemblies that feed the distributor. 
 
Most 33's come with 20 MA full duplex (4 wire) setup in the UCC-6.  You need a current loop to RS 232 adapter to connect to a computer.  Some computers have a current loop interface in them.  PDP's etc.  Ask on Greenkeys. 
 
I will include some pics that might help identify stuff. 
 
Happy Thanksgiving from Vermont where we have 4 to 8 inches snow overnight. 
 
Wayne
KB1FDW

distributor

 
kybd contacts
 
 
codebars
 
 
UCC-6
 

______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20141128/64a8033f/attachment.html>