[GreenKeys] Replacement Rubber Hammers

[Jarratt RMA]

Those other parts would be really useful and seem to be the kind that 3D
printers should  be able to make, although the contact block looks like it
would be quite complex. That said, I would just love to get a nice new
rubber hammer or a cosmetic and functional analog.

Regards

Rob


On 30 January 2014 20:05, Teletypeparts <teletypeparts at aol.com> wrote:

> A lot of time and energy is being spent on the rubber hammer replacement.
> A quick fix would be BLACK vinyl tubing 7/16 OD and 5/16 ID cut to 7/8 inch
> long.  It would look closer to the original than the clear vinyl.  I dont
> see it at my local hardware store, just the clear.
>
> Its not for me to say but some of you hi-tech guys might want to drop the
> rubber hammer research and look into replacement tape reader covers, 183032
> and 183033.
>
> Also the contact block for the tape reader is a part that is needed often
> and in short supply.
>
> Just my 2 cents worth and thanks to those who are doing the research.
>
> Wayne
> KB1FDW
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive:
> http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20140130/d0ad113b/attachment.html>