[GreenKeys] Replacement Rubber Cap for Model 33/32 ASR "hammer"

[Nick Jarmany]

I would have thought the best approach would be to take the external dimensions of the print hammer head and combine with dimensions taken from the Print Hammer Bail to define the required dimensions of the "cavity"?

Nick

> -----Original Message-----
> From: greenkeys-bounces at mailman.qth.net [mailto:greenkeys-
> bounces at mailman.qth.net] On Behalf Of Jones, Douglas W
> Sent: 30 January 2014 19:14
> To: Steve Schlink; David Tumey; greenkeys at mailman.qth.net
> Subject: Re: [GreenKeys] Replacement Rubber Cap for Model 33/32 ASR
> "hammer"
>
> I have a gummy but largely intact original rubber hammer head on the TTY33
> we're restoring here at the U of Iowa.  I have a micrometer and both inside
> and outside calipers.  I could just pop (or cut) the old hammer off and
> measure it, if that would help.  Being basically cylindric, with a recess in one
> flat end there are not a huge number of dimensions to consider.
>
>               Doug Jones
>               jones at cs.uiowa.edu
> __________________________________________________________
> ____
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive:
> http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
The information contained in this message as well as any attachments is confidential and is only intended for the person(s) to whom it is addressed. The contents may be subject to a non-disclosure or confidentiality agreement. If the reader of this message is not the intended recipient or you have received this communication in error, please be aware that any dissemination, distribution or duplication is strictly prohibited, and can be illegal, and please notify us immediately and return the original message to us at the address above. The views and opinions expressed in this e-mail message are the author's own and may not reflect the views and opinions of Quixant.

Quixant plc. Registered in England No. 4316977
Registered Address: Aisle Barn, 100 High Street, Balsham, Cambridge, CB21 4EP, UK

Quixant UK Ltd. Registered in England No. 8383675
Registered Address: Aisle Barn, 100 High Street, Balsham, Cambridge, CB21 4EP, UK
________________________________


The information contained in this message as well as any attachments is confidential and is only intended for the person(s) to whom it is addressed. The contents may be subject to a non-disclosure or confidentiality agreement. If the reader of this message is not the intended recipient or you have received this communication in error, please be aware that any dissemination, distribution or duplication is strictly prohibited, and can be illegal, and please notify us immediately and return the original message to us at the address above. The views and opinions expressed in this e-mail message are the author's own and may not reflect the views and opinions of Quixant.