[GreenKeys] moving a 28 ASR...Reassembly...problem

[W2HX]

Well, despite my best efforts, I have managed to lose one half of a shaft coupler. I've looked everywhere for it.  I think I have a better chance of finding Jimmy Hoffa than this shaft coupler :( does anyone have one to sell to me? Technically I only need half without the rubber (I have half with the rubber).  I don't know how I screwed that up. I must not have tightened the set screw as I left half on the shaft going to the TD.  It must have fallen out during all of the moving.

If anyone has a spare, please contact me with cost and shipping to 10510.
Thanks in advance :(
Eugene


From: greenkeys-bounces at mailman.qth.net [mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of W2HX
Sent: Tuesday, February 11, 2014 11:48 PM
To: greenkeys at mailman.qth.net
Subject: Re: [GreenKeys] moving a 28 ASR...Phase 2 completed!

Put the ASR on its side, placed it on a dolly, navigated past the stairs into the bedroom. While on its side, I installed the 4 casters.  XYL and I put it back on its "feet" on the casters.  Next I had to get it down 3 steps into the new shack.  Took two rails from a rack I am building to make a ramp. Supported the ramp in the middle, screwed the rails down to a board to keep the distance (fairly) constant. The rails had lips on both sides making a channel. The casters fit into this channel perfectly. 28ASR rolled right down the ramp like butter.  ASR is now happy in the new shack and all that is left is phase 3, putting it all back together!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20140212/7b73ed39/attachment.html>