[GreenKeys] moving a 28 ASR...Phase 2 completed!

[W2HX]

Put the ASR on its side, placed it on a dolly, navigated past the stairs into the bedroom. While on its side, I installed the 4 casters.  XYL and I put it back on its "feet" on the casters.  Next I had to get it down 3 steps into the new shack.  Took two rails from a rack I am building to make a ramp. Supported the ramp in the middle, screwed the rails down to a board to keep the distance (fairly) constant. The rails had lips on both sides making a channel. The casters fit into this channel perfectly. 28ASR rolled right down the ramp like butter.  ASR is now happy in the new shack and all that is left is phase 3, putting it all back together!


[cid:image002.png at 01CF2783.A2F66710]



From: greenkeys-bounces at mailman.qth.net [mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of W2HX
Sent: Tuesday, February 11, 2014 10:08 PM
To: greenkeys at mailman.qth.net
Subject: [GreenKeys] moving a 28 ASR...

So far so good. Got the guts out with little difficulty. Next step is to move the body.. stay tuned


[cid:image003.png at 01CF2783.A2F66710]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20140211/af21160f/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 183371 bytes
Desc: image002.png
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20140211/af21160f/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 426068 bytes
Desc: image003.png
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20140211/af21160f/attachment-0003.png>