[GreenKeys] ASR 32/33 chad boxes

[Jack Hart]

An appropriate cereal box to use would be "Fruit Loops"!!!

 

Jack K0TTY

 

NNNN

 

 

 

From: greenkeys-bounces at mailman.qth.net
[mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of Don Robert House
Sent: Friday, February 7, 2014 11:34 PM
To: Douglas W Jones
Cc: Greenkeys
Subject: Re: [GreenKeys] ASR 32/33 chad boxes

 

Doug,

 

The thicker cereal boxes work best.. look for oatmeal in a rectangular box.

As Wayne says use one of the longer flaps to make the slide-in

also cut a notch in the front down about an inch so that a few pieces

of chad will fall out before the box is full and dumps thousands of

oiled tiny bits of happiness on the deck.

 

Don

K9TTY

 

On 7 Feb 2014, at 2:07 PM, Teletypeparts wrote:

 

Doug,

 

Chad boxes are in short supply.  They seem to get thrown away.  You can make
one out of a small but tall cardboard box.  Just cut off 3 of the flaps and
use the last one to slide into the pedestal groove.  

 

I dont have any pedestal rear panels either.  

 

I do have a new handle 183045 you can have N/C.  

 

Just give me your address and I will get the handle out Monday or Tuesday.  

 

Wayne

KB1FDW





-----Original Message-----
From: Jones, Douglas W <douglas-w-jones at uiowa.edu>
To: greenkeys at mailman.qth.net Keys <greenkeys at mailman.qth.net>
Sent: Fri, Feb 7, 2014 2:43 pm
Subject: Re: [GreenKeys] More ASR 32/33 tape feed wheels

 
On Feb 6, 2014, at 10:55 AM, Jack Rubin wrote:
 
> I kind of spaced out while ordering these - I thought I was buy 3 of these

tape feed wheels; instead I bought three _lots_ of 10 each, for a total of
30.
 
As far as I know, the feed sprocket in the model 33 I'm working
on is in fine condition.
 
However, part number "183045 -- Lever 4" is broken.  At first,
I thought it would be simple to glue with Tenax or some similar
ABS adhesive, but it's not a simple break, a triangular chunk
is missing.  This means, if we glue, we'll need to glue and
splint, a messy repair but it seems possible.
 
We're also missing part number "182924 - Box, Chad, 4"
I think we can fabricate a decent replacement from plexiglass.
 
And we're missing "183244 - Panel (Covert Grey Smooth) 4"
which is the back panel to the pedistal.  I suppose any sheet
metal shop could fabricate a repacement, and we can live without
it.
 
               Doug Jones
               jones at cs.uiowa.edu
 
 
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net <mailto:GreenKeys at mailman.qth.net?> 
 
2002-to-present greenkeys archive:
http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive:
http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
http://comcents.com/tty/greenkeyssearch.html
 
This list hosted by: http://www.qsl.net <http://www.qsl.net/> 
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive:
http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive:
http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20140208/d19bd816/attachment.html>