[GreenKeys] ASR 32/33 chad boxes

[Christian Gauger-Cosgrove]

Hi group,

What with the recent discussions of 3D printing a new head for the
32/33 series machines, how difficult would it be to 3D print a new
chad box?

Cheers,
Christian



On 8 February 2014 00:33, Don Robert House <62.5milliamps at gmail.com> wrote:
> Doug,
>
> The thicker cereal boxes work best.. look for oatmeal in a rectangular box.
> As Wayne says use one of the longer flaps to make the slide-in
> also cut a notch in the front down about an inch so that a few pieces
> of chad will fall out before the box is full and dumps thousands of
> oiled tiny bits of happiness on the deck.
>
> Don
> K9TTY
>
> On 7 Feb 2014, at 2:07 PM, Teletypeparts wrote:
>
> Doug,
>
> Chad boxes are in short supply.  They seem to get thrown away.  You can make
> one out of a small but tall cardboard box.  Just cut off 3 of the flaps and
> use the last one to slide into the pedestal groove.
>
> I dont have any pedestal rear panels either.
>
> I do have a new handle 183045 you can have N/C.
>
> Just give me your address and I will get the handle out Monday or Tuesday.
>
> Wayne
> KB1FDW
>
>
>
> -----Original Message-----
> From: Jones, Douglas W <douglas-w-jones at uiowa.edu>
> To: greenkeys at mailman.qth.net Keys <greenkeys at mailman.qth.net>
> Sent: Fri, Feb 7, 2014 2:43 pm
> Subject: Re: [GreenKeys] More ASR 32/33 tape feed wheels
>
>
> On Feb 6, 2014, at 10:55 AM, Jack Rubin wrote:
>
>> I kind of spaced out while ordering these - I thought I was buy 3 of these
> tape feed wheels; instead I bought three _lots_ of 10 each, for a total of
> 30.
>
> As far as I know, the feed sprocket in the model 33 I'm working
> on is in fine condition.
>
> However, part number "183045 -- Lever 4" is broken.  At first,
> I thought it would be simple to glue with Tenax or some similar
> ABS adhesive, but it's not a simple break, a triangular chunk
> is missing.  This means, if we glue, we'll need to glue and
> splint, a messy repair but it seems possible.
>
> We're also missing part number "182924 - Box, Chad, 4"
> I think we can fabricate a decent replacement from plexiglass.
>
> And we're missing "183244 - Panel (Covert Grey Smooth) 4"
> which is the back panel to the pedistal.  I suppose any sheet
> metal shop could fabricate a repacement, and we can live without
> it.
>
> Doug Jones
> jones at cs.uiowa.edu
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive:
> http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive:
> http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive:
> http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html



-- 
Christian M. Gauger-Cosgrove
STCKON08DS0
Contact information available upon request.