[GreenKeys] 32 and 33 drive belts

[Don Robert House]

A couple of our guys have had belts made.  I posted the source recently.

SDP Sterling Instrument, Division of Designatronics, Inc.
in New Hyde Park, NY  (516) 328-3300
http://www.sdp-si.com

Don


On 23 Oct 2013, at 8:09 PM, Cory Heisterkamp wrote:

And it's not just the 28. My model 83 card sorter apparently uses  
belts with a 0.23" pitch. Nothing standard will work. Has anyone tried  
having belts custom made? -Cory

On Oct 23, 2013, at 7:28 PM, Don Robert House  
<62.5milliamps at gmail.com> wrote:

> The belts for the machines made after 1963 are mostly standard...  
> Sadly the belts needed for the Model 28 line are all non-standard.
>
> Don
> K9TTY
>
>
> On 22 Oct 2013, at 1:10 PM, Cory Heisterkamp wrote:
>
> Wayne, thank you for the heads-up. For those that haven't followed  
> the link, the catalogs are extensive with just about every belt and  
> cog you can imagine. I'll be paging through these for my 083 belts.
>
> Regards,
> Cory
>
>
>
>
> On Tue, Oct 22, 2013 at 11:28 AM, Teletypeparts  
> <teletypeparts at aol.com> wrote:
> Greetings fellow TTY people,
>
> I received some drive belts from Stock Drive Products.  They are a  
> perfect match to Teletype's.  They dont have the flexibility of the  
> original and they are off white in color.  Havent installed one  
> yet.  The cost is around $5 each and if you order on line there is  
> no minimum order.
>
> I accidentally ordered the wrong ones and they replaced them with  
> the correct ones, no charge at all.  Very friendly service.
>
> The web site is https://sdp-si.com/eStore/Catalog
>
> The part number is A26R 3-047025.  They refer to the belt as a  
> Timing Belt.
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20131023/f2067115/attachment.html>