[GreenKeys] 32 and 33 drive belts

[Cory Heisterkamp]

And it's not just the 28. My model 83 card sorter apparently uses belts with a 0.23" pitch. Nothing standard will work. Has anyone tried having belts custom made? -Cory

On Oct 23, 2013, at 7:28 PM, Don Robert House <62.5milliamps at gmail.com> wrote:

> The belts for the machines made after 1963 are mostly standard... Sadly the belts needed for the Model 28 line are all non-standard.
> 
> Don
> K9TTY
> 
> 
> On 22 Oct 2013, at 1:10 PM, Cory Heisterkamp wrote:
> 
> Wayne, thank you for the heads-up. For those that haven't followed the link, the catalogs are extensive with just about every belt and cog you can imagine. I'll be paging through these for my 083 belts.
> 
> Regards,
> Cory
> 
> 
> 
> 
> On Tue, Oct 22, 2013 at 11:28 AM, Teletypeparts <teletypeparts at aol.com> wrote:
>> Greetings fellow TTY people,
>>  
>> I received some drive belts from Stock Drive Products.  They are a perfect match to Teletype's.  They dont have the flexibility of the original and they are off white in color.  Havent installed one yet.  The cost is around $5 each and if you order on line there is no minimum order. 
>>  
>> I accidentally ordered the wrong ones and they replaced them with the correct ones, no charge at all.  Very friendly service. 
>>  
>> The web site is https://sdp-si.com/eStore/Catalog
>>  
>> The part number is A26R 3-047025.  They refer to the belt as a Timing Belt. 
>>  
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20131023/b1f29562/attachment.html>