[GreenKeys] Model 14 Help

[Don Robert House]

Old wise a s s here.

As they say in church.. "It's in the book!"

On Nick England's site are complete manuals on the M14 equipment, or I  
can send you a PDF.

Good Luck,

Don K9TTY

P.S.  Just a tip... use bond paper to clean the armature of the  
selector magnet.  Old and grease are the enemy of the selector..



On 8 Mar 2013, at 11:26 AM, Keith Densmore wrote:

Greetings Listmates,
I have a model 14 Typing Reperf on the bench. I recently got it from  
an estate. I have done a preliminary clean up and oiling of the  
machine and it appears in very good shape. However, upon firing it up,  
I see  it prints and punches ok but with lots of errors (maybe a  
thrity percent rate). I see by the manual there is a lot of  
adjustments/etc in the Selector section of the book.
I have never worked on one of these before and so I wonder if some  
kind soul could give me some advise as to what to look for or how to  
test it further to locate the problem.

Thanks, 73,
Keith ve3ts
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html