[GreenKeys] Odd Lorenz motor behavior

[Jeffrey D Angus]

On 6/24/2013 10:43 PM, Jeffrey D Angus wrote:
> Thank you to Henning for pointing out it was a 1 uF capacitor
> that was the problem.
The new capacitor solved the speed problem.

Then I realized the rubber bushings that support the plywood tray
underneath the machine had failed.

Surprisingly  enough THOSE were available from McMaster Carr.
With Metric threads. Those showed up today, and I had to do a
little modifying to the wood cabinet and base because the new
bushings don't have a long enough thread to reach the original
hardware.

A 7/8" spade bit to recess the hole in the plate an bit deeper
took care of that end, then an 82 degree 3/4" counter sink took
care of slightly recessing the flat head threaded inserts in the
cabinet.

It's back together now, waiting for me to se the speed on the
motor correctly.

Jeff-1.0
wa6fwi