[GreenKeys] Odd Lorenz motor behavior

[Jeffrey D Angus]

Thank you to Henning for pointing out it was a 1 uF capacitor
that was the problem.

By the way, these are available stateside from Galco.
<http://www.galco.com/buy/EBM-Papst/2100-4-7320>

Interestingly, the threaded stud on the new part is metric and
the original nut from the Lorenz fit's perfectly. I did have to
shorten the stud about 3/32" to not protrude under the plate
it mounts to.

I should have the Lorenz back together by the weekend. I want
to dribble and smear some oil and grease on the various bits
while I have it apart.

I'll let you know how it turned out.

Jeff-1.0
wa6fwi