[GreenKeys] Current Loop Connector

[Rob Jarratt]

The second link you sent (for the mating connectors) does not seem right,
but the first link should put me on the right track anyway.

 

Thanks!

 

Rob

 

From: Jeffrey D Angus [mailto:jdangus at att.net] 
Sent: 02 February 2013 15:16
To: r.jarratt at computer.org
Cc: Rob Jarratt; greenkeys at mailman.qth.net
Subject: Re: [GreenKeys] Current Loop Connector

 

On 2/2/2013 8:16 AM, Rob Jarratt wrote:

If I open the case there are no screws on the connector. This is what it
looks like: http://sdrv.ms/UdqZZn

 Regards

 Rob

A picture is worth a thousand words.
My apologies on the assumption. The drawing of the back panel in
the manual was a bit vague, 
It doesn't help that the manufacturer lists screw terminals as the
connections in their specification page.
 <http://www.westermosales.com/ma-21_tech.html>
<http://www.westermosales.com/ma-21_tech.html>

I believe I found the connector shown in your picture.
 <http://www.mouser.com/ds/2/209/KC-301128-199172.pdf>
<http://www.mouser.com/ds/2/209/KC-301128-199172.pdf>

And the mating connectors for it.
 <http://www.mouser.com/MobileCatalog.aspx?page=1724>
<http://www.mouser.com/MobileCatalog.aspx?page=1724>

Which explains why they refer to it as a "5-position screw terminal."
These are screw type terminal as the connection to a plug that mates
with the chassis connector.

Jeff-1.0
wa6fwi



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20130202/01c9bfc3/attachment-0001.html>