[GreenKeys] Lubricate bearings?

[Steve Schlink]

Jonathan,

Sealed bearing are just that - sealed.

If you could get oil in, it would indicate that the seals are shot, and 
nothing you are going to do will fix it.

Also, sealed ball or roller bearing don't run in oil, but in grease.

If in doubt, replace.

Steve

At 08:35 PM 4/2/2013 -0700, Jonathan Mc Donald wrote:
>Well, I'm afraid to ask this question, but here goes.
>
>I've have all the bearings out of the Klein tt-98, and they are 
>sealed.  They seem ok, but I sense putting them back into
>service without lubricating them might be problematic.  Can they be soaked 
>in gear oil or something?  How can I get them lubricated?
>
>Thanks,
>Jonathan
>______________________________________________________________
>GreenKeys mailing list
>Home: http://mailman.qth.net/mailman/listinfo/greenkeys
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:GreenKeys at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html