[GreenKeys] Model 19 reperforator dolly

[Jim Haynes]

The one I have the top is flat and the reperf is not bolted down.  The
reperf base has round metal feet similar to those on a Model 15 base.
Now it may be that there is supposed to be a felt pad on top of the
dolly.  I don't have one, and will have to dig through parts books to
see if one is shown.

The parts book for the 14 typing reperf, high base, shows a felt pad,
but doesn't show the dolly.  The parts book for metal tables shows
the dolly with a felt pad on it and a couple of studs that stick up
presumably to keep the base from shifting off the dolly.  Mine doesn't
have those.

Here's another detail of the dolly that I didn't notice until I moved
the reperf off of it.  There is a rectangular hole in the top for the
cables to go through.  Looking at the top, the hole starts 2 3/4 inches
from the left side and then the hole is 3 3/8 inches wide.  The hole 
starts 1/4 inch from the back of the table and is 3 3/4 inches in that
direction.

Believe you have the CD ROMs with manuals - there is one titled Metal 
Tables 1077B that has a picture of the dolly.