[GreenKeys] Grease and oil

[Paul Heller]

Folks,

I've enjoyed our discussion on oil and grease. I've learned a lot. Hats off to you folks who know a lot more than I do.

Paul
KD0DFR

On Aug 8, 2012, at 12:26 PM, Teletypeparts wrote:

> Everybody seems to have their pet theory on the grease and oil for a 33.  Most of them are probably fine. 
>  
> I find that 10 or 20 wt non-detergent oil is fine for the oil.  Never 3 in 1 or WD 40.  The grease is not too important as there are only a few places that might require it.  The selector camshaft lobes and the motor gears when replacing them.  All else can be lubed with oil.  A couple small exceptions that I cant think of, but would be obvious when you see them. 
>  
> Wayne
> KB1FDW

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/greenkeys/attachments/20120808/7c1b620f/attachment.html