[GreenKeys] Model 28 will not do FIGS anymore

[tony j. podrasky]

Jim Haynes wrote:
> The 0 code bar is for automatic carriage return and line feed.  Do you 
> have 216B on the theory of operation?  (or the BSP section 573-115-100TC)

Yeah - the 216B / 217B / 1149B

> Since the S code bar is not moving you probably don't have to worry about
> the front plate mechanism, unless something is jammed there.  You need
> to look at the LTRS and FIGS function bars in the stunt box and see
> why they are not moving the S code bar from side to side.

Will do. As I mentioned, if I pull the "S" bar out with my fingernail,
the machine goes into FIGS - so I'm guessing that the problem can't be
THAT BAD. Maybe a spring flew off.

I'll put it on the keyboard base tomorrow and play with it. I already
checked how the function bars work on the 28-KSR, so I have an idea
as to what to look for.

> You can mess things up taking the front plate off, but the instructions
> in the book tell you how to do it correctly and get it back on
> correctly.

And as I learned with my Kleinschmidt TT-100B/FG back in the 60's, when
you make an adjustment, turn the motor by hand to see if all is well...

Thanx again for the help.

73,
tony

-- 
Tony J. Podrasky | MicroSoft error messages written in Haiku:
                  |
                  |         Three things are certain:
                  |         Death, taxes and lost data.
                  |         Guess which has occurred?